<0x0-0xff> DSAP (Range: 0x00 - 0xFF)
<0x0-0xff> SSAP (Range: 0x00 - 0xFF)
<0x0-0xffffff> SNAP OUI (Range 0x000000 -
0XFFFFFF)
Show the VLANs configured for each interface
show vlan status [ interface ( <port_type> [ <plist> ] ) ] [ combined |
admin | nas | mvr | voice-vlan | mstp | erps | vcl | evc | gvrp | all |
conflicts ]
Show the VLANs configured by administrator
Show all VLANs configured
Show the VLANs configured by a combination
Show VLANs configurations that has conflicts
Show the VLANs configured by GVRP
Show the VLANs configured for a specific interface(s)
Show the VLANs configured by MSTP.
Show the VLANs configured by MVR
Show the VLANs configured by NAS
Show the VLANs configured by VCL
Show the VLANs configured by Voice VLAN
3.2.62 show qos-queue-mapping
Show CoS queue mapping table.
3.2.63 show interface ports <portNo> priority
Show QoS per gigabit port.
show interface <port_type> [ <port_type_list> ] statistics { priority
[ <0~7> ] }
Valid values:0 ~7
Type: Mandatory
Port type in Fast, Giga or Tengiga ethernet
Valid values:0 ~ 10
Type: Mandatory
Show scheduler profile table.
show queue-scheduler profile