Versa Technology VX-IGP-1204F - Lldp Configure Commands; Lldp Holdtime; Lldp Med; Lldp Receive

74
3.16 LLDP Configure commands
3.16.1 lldp holdtime
Description
Sets LLDP hold time (The neighbor switch will discarded the LLDP
information after \"hold time\" multiplied with \"timer\" seconds ).
Syntax
lldp holdtime <2-10>
Parameter
Name
Description
<2-10>
Holdtime 2-10 seconds
3.16.2 lldp med
Description
LLDP MED
Syntax
See Description
Parameter
Name
Description
datum
Datum (geodetic system) type
nad83-mllw
Mean lower low water datum
1983
nad83-navd88
North American vertical datum
1983
wgs84
World Geodetic System 1984
fast
Number of times to repeat LLDP frame
transmission at fast start
<v_1_to_10> : <1-10>
location-tlv
LLDP-MED Location Type Length Value parameter
altitude
Altitude parameter
civic-addr
Civic address information and postal
information
elin-addr
Emergency Location Identification
Number, (e.g. E911 and others),
such as defined by TIA or NENA.
latitude
Latitude parameter
longitude
Longitude parameter
media-vlan-policy
Use the media-vlan-policy to create a policy, which
can be assigned to an interface
<Index : 0-31> : Policy id for the policy which is
created
3.16.3 lldp receive
Description
Enable/Disable decoding of received LLDP frames.
Syntax
lldp receive
3.16.4 lldp reinit <1-10>
Description
LLDP tx reinitialization delay in seconds.