Set role to balancing chain central block
Set role to balancing chain member
Set role to balancing chain terminal 1
Set role to balancing chain terminal 2
3.7 Spanning Tree
3.7.1 spanning-tree
Enable/disable STP on this interface
3.7.2 spanning-tree aggregation
spanning-tree aggregation
3.7.3 spanning-tree auto-edge
3.7.4 spanning-tree auto-edge
3.7.5 spanning-tree bpdu-guard
Enable/disable BPDU guard
Edge port
spanning-tree
STP Bridge
3.7.7 spanning-tree edge bpdu-filter
Enable BPDU filter (stop BPDU tx/rx)
spanning-tree edge bpdu-filter