- 19 -
CHAPTER 3: Advanced Features
Settings (Main Menu 3)
Functions cont.
3-4 DISPLAY MODE: Toggling the display mode will change backlighting of the interface display. Make
your selection by pressing and holding ◄/OK to select and save the setting. Press and hold ESC/► exit
without saving any settings.
3-5 FAN: The fan settings can be adjusted to OFF (3-5-1), AUTO (3-5-2, recommended), or ON
(3-5-3).
3-6 MISC: Use this setting to adjust the Radio Channels between 01-15 to compensate for any interfer-
ence between the Vertex Illumina, the V-Link accessory and other remote devices.
3-7 FUNCTIONS: This menu has the optional SPARE MODULES (3-7-1) and FACTORY RESET (3-7-2)
selections. SPARE MODULES is initially deactivated, but can be accessed with the installation of optional
AuxiliaryModulesandtheirsupportrmware.Furtherdetailsregardingtheseitemsareavailablefrom
authorized Vertex Aquaristick dealers.
Use FACTORY RESET to clear user-programmed settings from the unit. Make your selection by holding
◄/OK. WARNING - Settings, once reset, are deleted permanently.
Info (Main Menu 4)
4 INFO:Thisselectiondisplaystheserialnumbersandcurrentsoftwareversionsinstalledonyourx-
ture. It is recommended that you keep your Illumina up to date with the latest software which can be
found on the Vertex Aquaristik website:
www.vertexaquaristik.com.
Updating Your Illumina Firmware
In order to update your Fixture, you will require a V-Link USB Stick. This accessory can be purchased at
your authorized Vertex Aquaristik retailer.
To Next Page
Loading...
Need help?
General