Vertex VX-1700 - Page 5

Page 3VX-1700 OPERATING MANUAL
FRONT PANEL CONTROLS & SWITCHES
KEYPAD FUNCTIONS
Secondary Function
(
Press +
)
Toggles the IF Bandpass Filter between “WIDE” and
“NARROW” in the J2B and A1A modes (only).
Toggles the Noise Blanker “on” and “off.”
Activates the Antenna Tuning process on all Memory
Channels in the current Memory Bank.
None
None
Indicates the memory channel with the channel
frequency and channel’s Alpha/numeric Tag alternately
when the channel display format is set to the “Alpha/
numeric Display” mode.
None
Selects the Scan Resume mode.
None
Engages the Set (Menu) mode.
None
Disables the “Alternate” key function.
Key Primary Function (Press Key)
None
Toggles the Noise Blanker “on” and “off.”
Activates the Antenna Tuning process.
None
None
Indicates the memory channel with the channel
frequency and channel’s Alpha/numeric Tag alternately
when the channel display format is set to the “Alpha/
numeric Display” mode.
Selects the Memory Bank.
Activates the “Dual Watch” feature.
None
Toggles the Display intensity between “High” and “Low.”
None
Activates the “Alternate” key function.