Page 6 VX-1700 OPERATING MANUAL
Electromagnetic Compatibility
and RF Exposure
If this transceiver is used with or in the vicinity of a com-
puter or computer-driven accessories, you may need to
experiment with grounding and/or radio frequency inter-
ference (RFI) suppression devices (such as ferrite cores)
to minimize interference to your communications caused
by energy leakage from the computer.
Although there is negligible radio frequency (RF) leak-
age from the VX-1700 transceiver itself, its antenna sys-
tem should be located as far away from humans and ani-
mals as practicable, so as to avoid the possibility of shock
due to accidental contact with the antenna or excessive
long-term exposure to RF energy.
Preliminary Inspection
Inspect the transceiver visually immediately upon open-
ing the packing carton. Confirm that all controls and
switches work freely, and inspect the cabinet for any dam-
age. Gently shake the transceiver to verify that no inter-
nal components have been shaken loose due to rough han-
dling during shipping.
If any evidence of damage is discovered, document it thor-
oughly and contact the shipping company (or your local
dealer, if the unit was purchased over-the-counter) so as
to get instructions regarding the prompt resolution of the
damage situation. Be certain to save the shipping carton,
especially if there are any punctures or other evidence of
damage incurred during shipping; if it is necessary to re-
turn the unit for service or replacement, use the original
packing materials but put the entire package inside an-
other packing carton, so as to preserve the evidence of
shipping damage for insurance purposes.
INSTALLATION
To Next Page
Loading...
Need help?
General
