Vertex VX-2100 series - EIA(CE) Radio Specifications

VX-2100/-2200
(
VHF
)
Service Manual 3
Specifications: EIA(CE)
General
Frequency Ranges: 134 -174 MHz
Number of Groups: 1 group (VX-2100 Series)
8 groups (VX-2200 Series)
Number of Channels: 8 channels (VX-2100 Series)
128 channels (VX-2200 Series)
Power Supply Voltage: 10.8 - 15.6 V DC
Channel Spacing: 12.5 / 20 / 25 kHz
Current Consumption (Approx.): TX: 6 A
RX: 1.5 A
Standby: 220 mA
Operating Temperature Range: –30 °C to +60 °C
Frequency Stability: Better than ±2.5 ppm
RF Input-Output Impedance: 50 Ohm
Dimension (W x H x D): 165 x 45 x 155 mm
Weight (Approx.): 1.3 kg
Receiver (Measured by EN300 086)
Sensitivity (20 dB SINAD) (W/N): –4 dB μV / –2 dB μV
Adjacent Channel Selectivity: 75 dB / 68 dB
Intermodulation: 68 dB
Spurious Response Rejection: 80 dB
Audio Output: Internal: 4 W @18 , 5% THD
External: 12 W @4 , 5% THD
Spurious Radiations: –57 dBm
Transmitter (Measured by EN300 086)
Output Power : 25 / 12.5 / 5 / 1 W
Maximum Deviation: ±5.0 kHz (25 kHz)
±4.0 kHz (20 kHz)
±2.5 kHz (12.5 kHz)
FM noise (W/N): 50 / 44 dB
Audio Distortion: Less than 3 % @ 1 kHz
Spurious Emission: –36 dBm < 1 GHz / –30 dBm > 1 GHz
Applcable Standards : EN300 086, 113, 219 · EN301 489 · EU directive 2004/104/EC
Specifications subject to change without notice or obligation.