Vertex VX-2100 series - Radio Specifications; USA(NA) & EXP Radio Specifications

VX-2100/-2200
(
VHF
)
Service Manual 2
Specifications: USA(NA) & EXP
General
Frequency Ranges: 134 -174 MHz
Number of Groups: 1 group (VX-2100 Series)
8 groups (VX-2200 Series)
Number of Channels: 8 channels (VX-2100 Series)
128 channels (VX-2200 Series)
Power Supply Voltage: 13.6 V ± 15%
Channel Spacing: 12.5 / 25 kHz
Current Consumption (Approx.): TX: 12 A (50 W) or 6 A (25 W)
RX: 1.5 A
Standby: 220 mA
Operating Temperature Range: –22 °F to +140 °F (–30 °C to +60 °C)
Frequency Stability: Better than ±2.5 ppm
RF Input-Output Impedance: 50 Ohm
Dimension (W x H x D): 6.5” x 1.8” x 6.1” inch (165 x 45 x 155 mm) (W/O knob)
Weight (Approx.): 2.87 lbs (1.3 kg)
Receiver (Measured by TIA/EIA-603-A)
Sensitivity (12 dB SINAD): 0.25 μV
Intermediate Frequency: 1st: 67.65 MHz, 2nd: 450 kHz
Adjacent Channel Selectivity: 75 dB (25 kHz)
65 dB (12.5 kHz)
Intermodulation: 73 dB (25 kHz)
70 dB (12.5 kHz)
Spurious & Image Rejection: 90 dB
Audio Output: Internal: 4 W @18 , 5% THD
External: 12 W @4 , 5% THD
Transmitter (Measured by TIA/EIA-603-A)
Output Power : 50 / 25 / 10 W (50 W)
25 / 12.5 / 5 / 1 W (25 W)
Modulation: 16K0F3E,11K0F3E
Maximum Deviation: ±5 kHz (25 kHz)
±2.5 kHz (12.5 kHz)
Audio Distortion: < 3 % (@1 kHz)
Conducted Spurious Emission: 70 dB below carrier
Specifications subject to change without notice or obligation.