Vertical Edge 120 - Direct Inward System Access (DISA) (Optional)

Edge 120 Digital Executive Telephone User Guide Page 11
Operation – Private Connection with a Conference Member
(Conference Controller only)
1. While engaged in a conference the display shows:
XXX XXX XXX
private forced
2. Press [private]
PRESS DIR#
exit
3. Press [exit] to abort the operation and return to the conference.
Or…
3. Dial the directory number (outside line number or Extension
number) to connect. (You may also simply press the outside line
button or DSS button of the outside line/extension to be
connected.)
4. That conference party is removed from the conference and
connected to you.
5. You may re-establish the conference with all members by
pressing the CONFERENCE button.
Or…
5. Hang up on the current connection and rejoin the remaining
member(s) by pressing HOLD.
6. Hang up to end the conference/connection.
Direct Inward System Access (DISA) (Optional)
This optional feature allows you to remotely access system resources
such as System Speed Dial, outside line Access, and Intercom dialing.
DISA can be accessed via the Automated Attendant (AAM required)
as well as by dedicated DISA lines.
Operation
1. Call into the DX-120 system from some remote location.
2. When the Automated Attendant answers, press 9 to access
DISA.
Or…
2. If the dialed number is a DISA line only, the line will automatically
answer.