Vertical Edge 120 - Page Allow;Deny FEATURE; Pause;Pause Insertion

Page 64 Edge 120 Digital Executive Telephone User Guide
Page Allow/Deny FEATURE 
You can block one-way page announcements at your extension by
dialing the Page Deny code. The Page Allow/Deny feature does not
affect enabled Background Music.
Operation – Setup
1. When the extension is idle, press FEATURE .
PAGING DENY
2. Press FEATURE  again to enable page announcements at
your extension.
PAGING ACCEPT
Pause/Pause Insertion
Pause Insertion is used to generate an intentional delay in dialing on
outgoing outside line calls. You can store a pause or a combination of
pauses in the Speed Dial bins to allow timed access to special
services while allowing you to monitor the progress of the call.
A pause will appear as “P” on the display.
Operation
When storing numbers in speed dial, use the feature code
FEATURE
 to insert a pause.