Vertical Edge 120 - Night Service Mode; Activate; Operation - Change Service Mode

Edge 120 Digital Executive Telephone User Guide Page 63
Operation – Deactivate
1. The extension must be idle.
2. Press FEATURE
. The display shows:
STATUS MSG DEL
3. The telephone returns to idle.
Night Service Mode / Activate FEATURE 
Business situations such as after-hours operation may require different
ringing patterns than those during normal business operations. The
system can be placed into Evening Mode as one of the available
Service Modes. This mode of operation allows outside line ringing,
dialing characteristics and various other features to be adjusted for
special handling during these times.
Any extension may manually switch the system service from day to
night mode, or vice-versa, using the Attendant Administration (with the
correct password). The attendant extension can set the system mode
of operation using the Evening Mode code or a feature button
programmed with the code for simple one-button operation.
Operation – Change Service Mode
1. At the attendant extension:
1.1. Press the button programmed with the Service Mode feature
code.
Or enter the feature code…
1.2. Press FEATURE
.
PSWD :_
1.3. Input the attendant extension password.
2. The Service Mode is advanced to the next mode.
3. Repeat until the appropriate mode of service displays.