Edge 120 Digital Executive Telephone User Guide Page 55
Feature/Directory Number Lookup FEATURE
Use Feature/Directory Number Lookup to find the directory number,
Feature Codes, and Suffix Codes required to operate system features.
Operation
1. While the telephone is idle (no call activity), press
FEATURE
. The display shows:
DIR#/CODE LOOKUP
dir ftr suffix
1.1. To find a system Directory Number, press [dir].
1.2. To find a system Feature Access Code, press [ftr]. Features
are listed abbreviated and alphabetically. (Note: Codes are
input by first pressing the FEATURE button.)
1.3. To find a Suffix Code, press [suffix]. The list displays digits
dialed after system resource directory numbers.
2. Use the [back] and [next] buttons to move through the display
categories.
3. Use HOLD to return to a previous menu level.
4. Press the SPK button twice to exit Feature/Directory Number
Lookup.
Flexible Feature Button Programming FEATURE
Digital Speakerphones have thirty dual-colored Flexible
(Programmable) Feature Buttons. You can store any system feature
code on any available Feature Button for one-button operation. Certain
programmed feature buttons will light when activated (DND, Call
Forward, DSS/BLF, etc.), while others such as Call Pick-Up,
Background Music, Last Number Redial, do not.
Features are separated into two distinct categories for programming
onto Flexible Buttons: Directory Numbers or Feature Codes.
To Next Page
Loading...
