Vescent SLICE-QTC - Page 26

Last update: 2022/04/01 18:06 slice:qt https://www.vescent.com/manuals/doku.php?id=slice:qt
https://www.vescent.com/manuals/ Printed on 2022/04/05 13:27
performed by persons not authorized by Vescent Photonics may void the warranty.
1)
More cables may be purchased separately; order p/n 50-00005
2)
Located in power receptacle on rear panel
3)
Subject to change without notice
4)
Nominal value 10 kΩ at room temperature. Precision at temperatures removed from room
temperature can be improved by selecting a thermistor whose resistance is ~10 kΩ near the target
temperature.
5)
Plant-dependent; value specified for D2-100 laser
6)
User-distributable over four channels
7)
Subject to 40 W overall maximum
8)
automatically adjusted
9)
See table 2 for acceptable input ranges
10)
Four-pin DIN connector
11)
In some early versions of the SLICE-QTC, the order of these connectors is reversed.
12)
Optimum Settings for Automatic Controllers, by J.G. Zieger and N. B. Nichols and
Wikipedia
13)
https://en.wikipedia.org/wiki/Logic_level
From:
https://www.vescent.com/manuals/ - Product Manuals
Permanent link:
https://www.vescent.com/manuals/doku.php?id=slice:qt
Last update: 2022/04/01 18:06