2022/04/05 13:27 25/26 SLICE-QTC Four-Channel Temperature Controller
Product Manuals - https://www.vescent.com/manuals/
Fig. 37: Ready to upgrade
The GUI should now actively control the SLICE-QTC. You should only have to do the above steps once
from a given PC. After assigning the COM port, the system will recognize the device in the future
(unless you reassign the COM port to another device).
Firmware Update
From time to time, Vescent will upgrade the firmware for controlling the SLICE-QTC. The procedure to
upgrade the firmware is given here.
Serial API
It is possible to control the SLICE-QTC through serial commands. Click here to access the SLICE-QTC
API.
Upgrading the SLICE-QTC firmware is not always necessary to use the Serial API. Check
your installed firmware version in the settings menu against the most recent firmware
version given here.
More information coming soon. Please contact sales [at] vescent [dot] com for information.
Maintenance
There are no user-serviceable parts inside this instrument. Refer all repairs to the manufacturer. Work
To Next Page
Loading...