Need help?Do you have a question about the Vetek DGT and is the answer not in the manual?
General| Brand | Vetek |
|---|---|
| Model | DGT |
| Category | Accessories |
| Language | English |
Connect the screened cable from the load cell(s) to the instrument terminal board.
Connect load cell cable to instrument via CELL1 terminal board or C1-C4 connectors.
Connect load cell cable to instrument via CELL1 terminal board or CELL1-4 connectors.
Proper grounding of indicator, load cells, junction box, and weighing structure is essential.
Visual representation of the setup environment menu structure and parameters.
Detailed explanation of the parameters and steps within the setup environment.
Steps to calibrate 1 to 4 independent scales or in TRANSM mode.
Steps to calibrate 2-4 load cells and equalize them directly from the indicator.
Procedure to adjust for gravity differences between calibration and use zones.
Useful for calibrating just the ZERO point when a permanent TARE weight is added.
Procedure to use when a sample weight is not available for real calibration.
Compulsory indication of gravitational acceleration for legal type instruments.
Compensates for differences in gravitational attraction between calibration and use zones.
Bi-directional port for connecting computers, PLCs, and remote displays.
Bi-directional port used to connect printers, computers, and PLCs.
Bidirectional port mainly used for PLC connections.
Configures serial port data transmission methods.
Indicates responses to serial commands and potential error conditions.
Defines data transmission formats: STANDARD, EXTENDED, MULTISCALE STRING.
Selects the channel to be configured for analogue output.
Selects the type of analogue output: disabled, gross weight, or net weight.
Selects data fields and layout for printing based on printer type.
Procedure to download and save created labels in the labeller's memory.
Schematic for DGT4, DGT60, and DGT4 AN motherboard connections.
Schematic for DGT4 PB motherboard connections, including PROFIBUS.
Schematic for DGTQ and DGTQ AN boards, including analog, serial, and PROFIBUS.
Schematic for DGTQ PB boards, including PROFIBUS and serial ports.
Schematic for DGTP, DGTP AN, and DGTP PB motherboards.
Schematic for DGTP PB expansion board, including PROFIBUS and serial ports.
Diagram and specifications for connecting multiple indicators via RS485.
To Next Page