DGT / DGT60 / DGTQ / DGTP
32
Connections in RS232 from LP542S, DP24, DP190 printer to the COM1 serial port of the DGTQ and DGTP
indicator:
DP24/LP542S DP190 | INDICATOR INDICATOR CABLE
9pin (female) Terminal Board | DGTQ DGTP STANDARD
-----------------------------------------------------------------------------------------------------------------------------------------------------------
GND 5 GND | GND GND Grey
CTS 8 BU | B(-) RX1 Brown
RX 3 RX | A(+) TX1 Pink
Please find below the connection in RS232 between the TPR printer and the COM1 serial port of the DGTQ
and DGTP indicator:
TPR | INDICATOR INDICATOR STANDARD
Terminal board | DGTQ DGTP CABLE
---------------------------------------------------------------------------------------------
GND | GND GND Black
RTS | B(-) RX1 Yellow
RX | A(+) TX1 Grey
| Blue (not connected)
Below is the connection in RS232 between the PC and the COM1 serial port of the DGTQ and DGTP
indicator:
PC PC | INDICATOR INDICATOR STANDARD
9pin 25pin | DGTQ DGTP CABLE
(male) (male) |
------------------------------------------------------------------------------------------------------------------------
GND 5 7 | GND GND Grey
TX 3 2 | B(-) RX1 Yellow
RX 2 3 | A(+) TX1 Pink
Please find below the RS232 connection for the DGT4/DGTQ/DGT60 configured as repeater:
TRANSMITTER | DGT4 | DGTQ | DGT60 |
----------------------------------------------------------------------------------------------------------------------
GND | GND | GND | GND |
TX | RX | RX2 | RX |
Below is shown the connection in RS232 between the GLH60R WEIGHT REPEATER and the COM1 serial port
of the DGTQ and DGTP indicator:
GLH60R | INDICATOR INDICATOR STANDARD
DGTQ DGTQ CABLE
------------------------------------------------------------------------------------------
RX 2 | A(+) TX1 Pink
GND 4 | GND GND Grey
To Next Page
Loading...