VEVOR KH-375 - Page 19

19
Reset BUTTON
Offline/Leave/Option BUTTON
SETUP BUTTON
TEST/Move BUTTON
ORIGIN BUTTON
V+ / V- BUTTONS
F+ / F- BUTTONS
Resets by stopping the cutter, and setting the origin of the carriage
arm to its right most position.
Ignores any changes that have been made to the
material or blade positions and exits Offline
ine/Pause mode, returning the cutter to the main
screen. Resumes any cutting that was taking place
when Offline ine/Pause mode was entered.
Has no function in this mode.
Accepts any changes that have been made to the material or
blade positions and exits Offline /Pause mode returning the
cutter to the main screen. Resumes any cutting that was taking
place when Offline /Pause mode was entered from the new
blade/material positions.
Accepts any changes that have been made to the material or blade
positions and exits Offline /Pause mode returning the cutter to
the main screen. Resumes any cutting that was taking place when
Offline /Pause mode was entered from the new blade/material
positions.
Reposition the material by moving the feed rollers. After
movements are made you can confirm the changes by pressing
the TEST or ORIGIN buttons or cancel by pressing the
OFFLINE/PAUSE button.
Reposition the blade by moving the carriage arm. After
movements are made you can confirm the changes by pressing
the TEST or ORIGIN buttons or cancel by pressing the
OFFLINE/PAUSE button.