MOUNTING WORKPIECE TO THE FACEPLATE
You can directly mount the faceplate to the workpiece by fastening four(or
eight) wood screws(sold separately). This is an easy process that should
be used whenever possible.
Always make sure the workpiece is securely fastened to the
faceplate or between centers.When faceplate is turning.always
make sure the screw fasteners do not come in contact with the
turning tool as work progresses
FACEPLATE TURNING
Turning which do not mount between centers require a faceplate for
holding the workpiece.All workpiece of this type should slightly over-size
to eliminate roughing cuts and vibration.
To Next Page
Loading...
