VEVOR XRJF-21 - Cleaning Method of Parts; User Considerations for Maintenance

When using it for the rst time or not using it for a long time, please clean the
pas before use.
14
Cleaning Method of Pas
Hopper cover
Valve pole
O seals for valve pole
Handle
Handle xing pin
Suppoing outlet valve
Fasten screws
Drip tray
Spout seals D
Outlet valve cap
Beater scraper
Beater
Sealant seals
Use food detergent and cleaning brushes to clean all pas that have been disassembled
User Considerations
Do not damage or lose components during operation.
Do not wash resin pas with hot water or a dishwashing machine. Failure to do so may cause
deformation.
Do not soak pas in detergents or germicidal solutions for more than 30 minutes. Failure to do so may
cause deterioration.
For some areas that are prone to accumulation of residual material, please wash carefully with a
cleaning brush.
Some pas have pointed edges, be careful not to scratch your hands.
Carefully wash the agitator with a washing brush, including the middle pa.