VEVOR XRJF-21 - Environmental Compliance

This product is purchased in accordance with the relevant provisions of the national regulations "Mea-
sures for the Administration of the Restricted Use of Hazardous Substances in Electrical and Electronic
Products"
Electronic appliances and electrical appliances are used in the indust standard
"SJ/T 11364 Requirements for the Restriction of the Use of Hazardous Substances
in Electrical and Electronic Products" Product hazardous substance control mark.
2.Description of the environmental label:
: Indicates that the content of the hazardous substance in all homogeneous materials of
the pa is below the limit requirements specied in GB/T 26572.
: Indicates that the content of the hazardous substance in at least one of the homogeneous
materials of the component exceeds the limit requirements specied in GB/T 26572.
Note: The components of this product are made of non-toxic and harmless green environ-
mental protection materials, and the non-environmentally friendly substances or elements
contained in this product are due to global technology
The level of surge and craftsmanship is limited and it is not possible to achieve complete
substitution of non-environmentally friendly substances or elements, but the content of
non-environmentally friendly substances or elements in this product
Extremely little, long-term use will not cause harm to the human body, please rest assured to
use.
The pa name
Fans
Motor
evaporator
lead mercu cadmium
Hexavalent
chromium
Polybrominated
biphenyls
Polybrominated
diphenyl ethers
Non-environmentally friendly substances or no substances
21
Environmental List
3.Instructions for the recycling of waste electrical and electronic products：
In order to better care for and protect the eah, when the user no longer needs this product or the
product is end-of-life, please comply with the relevant laws and regulations on the recycling of waste
electronic and electrical products in the count of use shall be handed over to the local recycling with
national approval The processing qualied manufacturer carries out recycling.
Any product with a cross-label of the wheeled trash can is a reminder of the obligation
to so and recycle waste. Research on the proper disposal of discarded products will
promote environmental protection.