03
Safety Instructions
Dear user,
Hello! Thank you for using our products, in order for you to better read this manual and use this
product, and to prevent personal inju and object damage accidents, please be sure to read carefully
and comply with the following symbols in this manual.
Be sure to store this book in a location where users can access it at any time
Behavior or action
that must be
prohibited
If the operation is
wrong, it may cause
harm to the user
The behavior or
action that must be
followed
If the operation is
wrong, it may cause
damage to goods
and propey
Electrical Requirements
It is necessa to use a separate dedicated socket and reliably grounded, and the power cord of
this series of slushy machines is equipped with a three-wire (grounded) plug which should be
used.Conforms to standard three-wire (grounded) sockets. Never remove the third pin (ground)
of the power cord under any circumstances.
The power cord plug should remain in rm contact with the outlet, otherwise it may cause a
re.In order to prevent damage to the power cord, do not let the slushy mahine press the
power cord or aicially step on the power cord, when moving the slushy machine, please be
careful and cautious, do not roll the power cord, otherwise the right side of the power supply
software can be damaged, causing electric shock or re accidents.
Be sure to use the power supply specied on the nameplate of this slushy machine; if the volt-
age uctuation range is large, please install an automatic voltage regulator suitable for power
according to the nameplate parameters.
Do not pull the plug of the slushy machine by pulling the power cord, hold the plug tightly and
pull it directly from the socket.
Before cleaning, repairing and replacing damaged lighting equipment, the power plug of the
slushy machine must be unplugged to prevent electric shock.
Do not use the power cord if it is damaged or the plug is worn, and it must be replaced at the
maintenance point designated by the manufacturer.
To Next Page
Loading...
