VEVOR XRJF-21 - Assembly Instructions; Component Assembly Guide; Safety During Assembly

Assembly of The Valve Stem
Assembly of Agitator Components
Assembly of Discharge Valves
1.Install the O-ring on the valve stem and assemble it
according to the diagram.
2.After the O-ring is installed, the suace is greased.
Valve pole
O seals for valve pole
1.The ared sealing ring is lubricated
at both ends.
2.Install the ared seal directly behind
the agitator.
3.Mount the scraper on the agitator. The spatula
arrangement in the agitator is loose.
Beater scraper
Beater
Sealant seals
1.Inse the greased stem of the installed
O-ring into the outlet hole of the discharge head.
2.Install the D-ring on the discharge head
mounting slot.
Valve pole
Suppoing outlet valve
Spout seals D
15
The Assembly Method of The Component
Methods for Installing on The Machine
When assembling and disassembling pas, turn o the control power switch.
Otherwise, it is possible to accidentally touch the staing machine and cause
injuries to the person.
Disinfect your hands and ngers during operation. Otherwise, it may endanger
human health.