VIA Technologies EPIA-5000 - VIA Motherboard - Mini ITX User Manual

Chapter 2
2-4
SDRAM Module Installation Procedures
1.) Push the white retaining latches at either end of the DIMM slot
outwards.
2.) Align the SDRAM module with the corresponding notches on the
DIMM slot. The modules will only fit if placed in the correct position.
2.) With both hands, press the SDRAM module down into the DIMM slot
so that the white retaining latches rotate up and secure the module in
place (see picture below).
The VIA EPIA Mini-ITX Mainboard provides two 168-pin DIMM slots for
PC 100/133 SDRAM memory modules. To operate properly, at least one
module must be installed.
Memory Installation
DIMM 1 & DIMM 2

VIA Technologies EPIA-5000 - VIA Motherboard - Mini ITX Specifications

General

Brand	VIA Technologies
Model	EPIA-5000 - VIA Motherboard - Mini ITX
Category	Motherboard
Language	English