BIOS Setup
3-7
All, But Diskette System halts for all errors (except diskette
error).
All, But Disk/Key System halts for all errors (except disk/KB
error)
IDE Primary Master/Slave and Secondary Master/Slave
Press <Enter> to enter the sub-menu and the following screen appears:
The specifications of your drive must match with the drive table. The
hard disk will not work properly if you enter improper information for
this category. Select Auto whenever possible. If you select Manual,
make sure the information provided is from your hard disk vendor or
system manufacturer.
IDE Primary Master The settings are None, Auto, Manual.
Access Mode The settings are CHS, LBA, Large, Auto.
Capacity The formatted size of the storage device.
Cylinder Number of cylinders.
Head Number of heads.
Precomp Write precompensation.
Landing Zone Cylinder location of the landing zone.
Sector Number of sectors.
To Next Page
Loading...
Need help?
General
