Chapter 3
3-24
HDD & FDD
Decide whether or not the power management unit should monitor
hard disks and floppy drives activties. Settings: Off and On.
PCI Master
Decide whether or not the power management unit should monitor
PCI master activties. Settings: Off and On.
PowerOn by PCI Card
Decide whether or not a PCI card can power up the system or resume
it from suspend state. Such PCI cards include LAN, onboard USB
ports, etc. Settings: Disabled and Enabled.
Modem Ring Resume
Decide whether or not Ring-In signals from Modem can wake up the
system from suspend state. Settings: Disabled and Enabled.
RTC Alarm Resume
The field is used to enable or disable the feature of booting up the
system on a scheduled time/date. Settings: Disabled and Enabled.
Date (of Month)
The field specifies the date for RTC Alarm Resume. Settings: 0~31.
Resume Time (hh:mm:ss)
The field specifies the time for RTC Alarm Resume. Format is
<hour><minute><second>.
To Next Page
Loading...
Need help?
General
