Chapter 4
4-10
4in1 chipset driver installation for Windows ME
1. Insert the supplied CD into the CD-ROM drive.
2. The CD should run automatically and the setup screen will appear. If
not, please run the “setup.exe” within the CD manually.
3. On the setup screen click on the Install VIA Chipset Drivers option
to install the VIA Service Pack 4.
4. When the installation starts, click Next to view the VIA Service
Pack README.
5. Click Yes to proceed.
6. The screen now will show two installation options. Select Normally
Install to manually install every driver, else select Quickly Install to
install the drivers automatically. Click Next to continue, for Quickly
Install users please go to step 11.
7. The screen now should show three drivers:
VIA ATAPI Vendor Support Driver.
AGP VxD Driver.
VIA INF Driver.
Please select all three drivers and click Next to continue.
8. Select Install VIA ATAPI Vendor Support Driver and click Next to
continue.
To Next Page
Loading...
Need help?
General
