BIOS Setup
3-7
No Errors System does not halt for any error.
All, But Keyboard System halts for all errors (except keyboard error).
All, But Diskette System halts for all errors (except diskette error).
All, But Disk/Key System halts for all errors (except disk/keyboard error)
IDE Primary Master/Slave and Secondary Master/Slave
Press <Enter> to enter the sub-menu and the following screen appears:
The specifications of your drive must match with the drive table. The hard disk
will not work properly if you enter improper information for this category.
Select Auto whenever possible. If you select Manual, make sure the informa-
tion provided is from your hard disk vendor or system manufacturer.
IDE Primary Slave The settings are None, Auto, Manual.
Access Mode The settings are CHS, LBA, Large, Auto.
Capacity The formatted size of the storage device.
Cylinder Number of cylinders.
Head Number of heads.
Precomp Write precompensation.
Landing Zone Cylinder location of the landing zone.
Sector Number of sectors.
PIO Mode The settings are Mode 0/1/2/3/4, Auto.
Ultra DMA Mode The settings are Disabled and Auto.
To Next Page
Loading...
Need help?
General
