Chapter 3
3-18
Power Management Timer
Set the idle time before system enters power saving mode. ACPI OS
such as Windows XP will override this option. Settings: Disable and 1/
2/4/6/8/10/20/30/40 min and 1 hr.
Video Off Option
Select whether or not to turn off the screen when system enters power
saving mode, ACPI OS such as Windows XP will override this option.
Settings are:
Always On - The screen is always on even when system enters power
saving mode.
Suspend -> Off - The screen is turned off when system enters power
saving mode.
Power Off by PWRBTN
This field configures the power button function. Settings are:
Delay 4 Sec - The system is turned off if power button is pressed for
more than four seconds.
Instant-Off - The power button functions as a normal power-on/-off
button.
Run VGABIOS if S3 Resume
Select whether to run VGA BIOS if resumed from S3 state. This is only
necessary for older VGA drivers, select Auto if in doubt. Settings: Auto,
Yes and No.
AC Loss Auto Restart
Determines the power state of the system when resumed from AC power
loss. If enabled, the system will automatically power on when AC power
is back. Settings: On and Off.
To Next Page
Loading...
Need help?
General
