EasyManua.ls Logo

VICI DBS NM PLUS 100 - Safety Precautions and Correct Use

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
NM PLUS HYDROGEN GENERATOR
USER MANUAL
www.vicidbs.com
Version 1.06.0000
3. SAFETY
3.1. NOTES OF FCC COMPLIANCE
3.2. CORRECT USE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The hydrogen generator is designed to produce hydrogen for laboratory use. The unit should only
be used for this purpose, according to the specications and instructions provided in this manual. In
particular, the following warnings must be observed at all times:
Indoor use only.
Never operate the unit at temperatures below zero degrees C. This will cause irreversible damage to
the electrolysis cell.
Use only pure water (see “Filling the water tank”).
Operate the unit in a room with sufcient ventilation (see “Placing the unit”).
Always unplug the unit from the mains power supply before accessing the internal
components for service or repair work.
4. WARNING
Any changes or modications to this equipment not expressly approved by the
manufacturer may void the user’s authority to operate the equipment.

Related product manuals