To Next PageTo Next Page
Need help?Do you have a question about the VICI DBS NM PLUS and is the answer not in the manual?
Explains the meaning of warning symbols used in the manual and on the device.
Details precautions for personal safety when operating the hydrogen generator.
Outlines safety guidelines for the instrument itself to prevent damage or malfunction.
Details common optional features like remote connections and cascading.
Identifies and describes the components visible on the front panel of the generator.
Identifies and describes the connectors and ports on the back panel of the generator.
Provides a labeled diagram of the internal components of the generator.
Illustrates the flow paths and electronic systems within the generator.
Shows the physical dimensions of the generator in millimeters and inches.
Lists the weights of different NM and PG Plus FID Station models.
Specifies environmental conditions and precautions for transporting and storing the instrument.
Details fuse types, values, and voltage selection procedures for the generator.
Instructions for inspecting the unit upon receipt and handling any damages.
Guidelines for placing and setting up the generator in its operating environment.
Explains how to connect hydrogen and air gas lines to the generator's ports.
Step-by-step instructions for refilling the internal water tank with deionized water.
Guidance on how to insert and secure the deionization bag within the water tank.
Detailed steps for powering on and initiating hydrogen production, including pressure settings.
Instructions on how to safely shut down the hydrogen generator component.
Steps for connecting and starting the zero air generator, including filter placement.
Explains the layout and information presented on the generator's liquid crystal display.
Illustrates the hierarchical menu system for configuring the generator.
Details various parameters that can be adjusted to configure the generator's operation.
Lists the parameters available for monitoring the generator's performance and status.
Describes various diagnostic and operational tests available for the generator.
Steps to connect power and start the zero air generator unit.
Information about the warm-up period and verification of the zero air generator's readiness.
Procedures for safely shutting down the zero air generator before service.
Lists common error messages for the hydrogen part and their corresponding actions.
Lists error conditions and troubleshooting steps for the zero air part.
Explains the status indicated by the front panel LEDs for the zero air generator.
Details error codes displayed on the mainboard and their meanings for the zero air system.
Outlines regular maintenance tasks for the hydrogen generator component.
Details routine maintenance procedures for the zero air generator.
Lists available maintenance kits and their components for the zero air generator.
Describes the contents of the annual maintenance kit for the zero air generator.
Details the kit for replacing the catalyst every three years in the zero air generator.
Instructions for replacing the annual pre-filter element in the zero air generator.
Steps for replacing the catalyst chamber in the zero air generator every three years.
Lists part numbers and descriptions for hydrogen generator components.
Lists part numbers and descriptions for zero air generator components.
General| Fuel Type | Gasoline |
|---|---|
| Power Output | 120V |
| Engine Type | 4-Stroke Engine |
| Noise Level | 68 dB |
| Starting System | Recoil |
| Outlet Types | 2x 120V 20A |
