37
NM & PG PLUS FID STATIONS
USER MANUAL
Version 1.03.0000
www.vicidbs.com
Thank you for your cooperation and please contact VICI if anything is not clear or you have further questions.
Please also provide full details of the problem, including the model and serial numbers of your gas generator.
Instructions will then be provided for the service or the return of the unit. If the warranty has expired, or the
fault is due to misuse of the unit, all repair and shipping costs are to be paid by the customer.
WARNING: If the generator needs to be transported, make sure that the water tank
is completely empty. Place the plug (supplied with the unit) on the Oxygen vent at the
rear of the unit. Close the water tank with the cap. Use the ORIGINAL packing material.
The generator should be transported in an upright position; this warning should be
marked at the outside of the shipping box.
IMPORTANT: The manufacturer reserves the right to change or modify its products
without prior notice.
13. SPARE PARTS LIST
13.1. HYDROGEN PART
PART NUMBER DESCRIPTION
DB-NMP200-000 Low pressure dryer (No Heating) for NM plus 100-600
DB-NMP200-001 Low pressure dryer (No Heating) for NM plus 1000
DB-10341 Low pressure dryer (No Heating) for NM plus 1350
DB-H200-043 Deionizer bag holder
DB-H200-042 Display membrane
DB-10648 Display touch screen FID-S/PG Plus Rack/NM Plus; cable included
DB-RH200-010 G/L separator, complete with ttings RACK/FID
DB-10216 G/L separator 1/8" tube quick straight tting
DB-H200-034 Perma Pure for all versions
DB-H200-035 Pressure release valve
DB-PH200-003 Small Power Supply PG plus / NM plus (100/160/250/300)
DB-PH200-004 Big Power Supply PG plus / NM plus (500/600/1000)
DB-H200-040 80mm axial fan
DB-RH200-001 Air/H2 Button
DB-RH201-001 Mainboard for RNMH2-100 plus
DB-RH202-001 Mainboard for RNMH2-160 plus
DB-RH203-001 Mainboard for RNMH2-250 plus
To Next Page
Loading...
