Why is my Vicon Farm Equipment mower unstable in the lifted position?
If your Vicon Farm Equipment mower is unstable when lifted, it may be because the driving speed is too high. Avoid sharp turns and lower your speed.
What causes excessive cutter bar wear on Vicon KM 2800?
Excessive cutter bar wear on Vicon Farm Equipment can be caused by ground pressure being too high. Correct the ground pressure to the appropriate level.
General| Brand | Vicon |
|---|---|
| Model | KM 2800 |
| Category | Farm Equipment |
| Language | English |
Provides an overview of the KM mowers, their functions, and design.
Introduction to the manual, usage advice, and dealer information.
Essential safety guidelines, warnings, and best practices for operation.
Explains the meaning and importance of warning labels on the machine.
General guidelines and safety precautions for assembling the mower.
Step-by-step guide for assembling specific mower models from the crate.
Step-by-step guide for assembling the KM 4000S model from the crate.
Specific assembly steps for wheels and spring settings for KM 2800/3200/4000.
Specific assembly steps for wheels, arms, and springs for the KM 4000S.
Instructions for adjusting the transport width of the KM4000S model.
Steps to prepare the tractor for hitching the mower, including PTO and hydraulics.
Guide on connecting the mower's hydraulic lift cylinder to the tractor.
Detailed steps for hitching the mower to the tractor's drawbar.
Instructions for mounting the PTO coupling shaft correctly.
Steps for shortening the PTO coupling shaft if necessary.
How to set and adjust the mower's cutting height.
Advice and techniques for mowing in stony conditions using optional skids.
How to set and adjust the ground pressure for optimal performance.
Guidance on mowing procedures, speed, and turning for efficient operation.
Procedures for placing the mower in transport position for road use.
Procedures for moving the mower from transport to working position.
Guidelines for transporting the mower on public roads and maximum speeds.
Safe procedures for parking the mower, including chocking and securing.
Schedule and points for greasing and oiling machine components.
General safety and maintenance guidelines before working on the machine.
Step-by-step guide for replacing worn or damaged mower blades.
Important checks and procedures for the cutter disc blade stops.
Regular checks and tightening of critical bolts and nuts.
Procedure for correctly timing the mower discs.
Checks and procedures for the mower's hydraulic system.
List of optional accessories for enhancing mower functionality.
Essential torque values for bolts and nuts during assembly and maintenance.
A guide to identifying and solving common operational problems.
To Next Page
