To Next Page
K
Kristina BakerJul 28, 2025
What to do if the windrow is not picked up by my Vicon RV 1601?
- EElizabeth WernerJul 28, 2025
If the windrow isn't being picked up by your Vicon Farm Equipment, several factors could be at play. First, ensure the pick-up is lowered adequately using pick-up wheels or chains; it might be set too high. An overload safety mechanism might be activated due to a blockage, so clear any obstructions. Inspect the drive chain for breakage or slippage and replace it if needed. Adjust your forward speed if it's too high, and consider making larger windrows if they're too small or thin. Lastly, check the pick-up tines for bending or breakage; straighten or replace them as necessary.
General
