Viconics VT8000 - Page 59

028 -0427-15 _UI-V T8350_ A4 _ EN www.viconics.com June 2020
59
VT8350 [ User Interface Guide ]
SERVICE VIEW 7/9
PARAMETER DETAILS
Conguration Parameters Default Value Signicance and Adjustments
CO2 eff. source
Read Only
CO2 Effective Source
Shows the congured source of the indoor CO2.
Display Readings: None, Local or WL 1 to WL 20
CO2 err. code
Default value: 0
Read Only
CO2 Error Code
Error code 0x0001 shows if there is an error with the sensor.
CO2 level
Read Only
CO2 Level
Shows CO2 level in PPM.
Display Readings: 0 to 5000 PPM
CO2 FW rev.
Read Only
CO2 Firmware Revision
Shows the Firmware version of the installed CO2 sensor module.
CO2 S/N
Read Only
CO2 Serial Number
Shows the serial number of the installed CO2 sensor module.
CO2 eff. source
0x0000
None
7/9 Service View
CO2 err. code
CO2 level
CO2 FW rev.
CO2 S/N
0 PPM