Viconics VT8000 - Page 61

028 -0427-15 _UI-V T8350_ A4 _ EN www.viconics.com June 2020
61
VT8350 [ User Interface Guide ]
SERVICE VIEW 9/9
The Device Name (BACnet name) consists of the model number followed by the COM address (MAC address). The BACnet name
can be changed via the BACnet front end and the new name appears on the above screen.
For example, when a VT8350U5B00 Room Controller with a MAC address of 41 is connected to a network, its default Device
Name is VT8350U5B00-41 and its default BACnet Device ID is 83041.
Firmware Revision shows the Firmware version currently installed on the Room Controller. Upgrading to a newer Firmware version
deletes the previoius Firmware version, however it is possible to set the Room Controller to an earlier Firmware version with the
Uploader Tool.
ZigBee Revision shows the Firmware version of an onboard ZigBee or optional ZigBee add-on module.
9/9 Service View
Device Name:
Firmware Revision
2.4.0
SE8350U5BxxP-254
Zigbee revision:
25.0.0
Graphic Library Revision:
4.1.0