Viconics VT8000 - Page 79

028 -0427-15 _UI-V T8350_ A4 _ EN www.viconics.com June 2020
79
VT8350 [ User Interface Guide ]
3/4 Lua
0
8
Param. B (AV26)
Param. C (AV27)
Param. D (AV28)
Param. E (AV29)
Param. F (AV30)
0
0
0
Param. A (AV25)
5
PARAMETER DETAILS
Conguration Parameters Default
Value
Signicance and Adjustments
Parameter A
Default value: 0
AV25
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter B
Default value: 0
AV26
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter C
Default value: 0
AV27
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter D
Default value: 0
AV28
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter E
Default value: 0
AV29
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter F
Default value: 0
AV30
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter G
Default value: 0
AV225
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter H
Default value: 0
AV226
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter I
Default value: 0
AV227
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter J
Default value: 0
AV228
The value of this parameter depends on what is assigned to it from a BAS or LUA script.
Parameter dened by Lua script
displays in red text.
Default value is normally 0, but
can be congured to use a
different default value.
LUA GENERIC PARAMETERS
The LUA settings include twelve generic parameters that do not have a specic function or pre-congured functions. These
parameters can be used in custom Lua scripts to store a value. They are also user congurable in their default state, but when
assigned a value via a LUA script or via BACnet (Priority 1-16), they become read only (not congurable locally by the user) and
the display color of the parameter changes to red. These parameters can also be congured via ZigBee, however they can still
be modied locally by the user.