16
OPERATING INSTRUCTIONS
Connecting the Hose
Only connect the pressure washer to COLD water. Hot water will
damage the pressure washer.
CAUTION
a) Attached the garden hose (not supplied) to the pressure washer's water inlet (7).
b) Connect the garden hose to a COLD water tap and turn the water supply ON.
NOTE: If the tap is not open suciently or your mains water ow is too slow, the pressure
washer will not work properly.
Fig. 9
Detergent bottle
Use only detergents designed for use in pressure washer only.
CAUTION
If you would like to use detergent for the job at hand.
a) Carefully remove the cap from the soap bottle.
b) Fill the soap bottle (4) with a good quality pressure washer detergent.
c) Ret the cap to the soap bottle.
d) Use the black spray nozzle marked soap
Fig. 10
To Next Page
Loading...