20
Store the pressure washer where it is dry and well ventilated. When placing the pressure
washer out of service for an extended period of time, remove the cleaning agent and drain all
the water left in the hoses.
The following steps should be taken in order to prepare the machine for storage.
a) Clean the machine as described in the previous section.
b) Store the machine in a dry, clean location. D o not store it nex t to corrosive materials,
such as fertilizer or fuel.
c) Store the machine indoors, in a cool, dry place, out of the reach of children.
d) Ensure battery is removed before storage.
Transport
Use the original packaging to ship whenever possible.
Always turn o the pressure washer before performing any cleaning, maintenance and storing.
• Clean the unit with a cloth, hand brush, etc.
• Keep all nuts, bolts and screws tight to be sure the equipment is in safe working
condition.
• Replace worn or damaged parts for safety.
WARNING
Cleaning, maintenance&storage
Cleaning
a) Regularly clean the pressure washer with a soft brush and a soft cloth moistened
with soapy water.
b) Never use solvents such as petrol, alcohol, ammonia water etc. These solvents
may damage the plastic parts.
After use
a) Check that the fuel tap is turned OFF.
b) Let the engine cools for at least 10 minutes before handling it. There is a risk of
burns and a hot engine can be a re hazard.
c) Remove all hoses and empty any excess water.
d) Wipe the pressure washer with a clean dry rag.
Storage
MAINTENANCE & CARE
To Next Page
Loading...