Victor 6000counts - Troubleshooting Guide; Troubleshooting Common Issues

6000counts Pocket Clamp Multimeter
“APO” symbol on the screen disappears and the auto power off function will be canceled.
6. Troubleshooting
If your instrument does not work, the following method can help you solve the general problem, if the fault still can not be excluded, please
contact the service center or dealer.
Failure phenomenon
Inspection site and method
Not shown
Battery not connected
Replace the battery
Low battery symbol
Replace the battery
Current is not input
Replace fuse
Resistance display error
The test pen is not in contact
This manual is subject to change without notice;
The contents of this manual are considered correct. If the user finds any errors, omissions, etc., please contact the manufacturer;
The company does not bear the accidents and hazards caused by the user's wrong operation;
The functions described in this manual are not intended to reasons of the product for special purposes.