Victoria Arduino ADONIS 3 gruoups - Page 61

5958
59
EN
• Selectoneormorecontinuekeys(thekeyorkeys
selected will remain lit up).
The key or keys will recall the selected unit’s
standard doses.
• PresstheENTER key to confirm.
The display will read:
 NOTE
all the selections can be programmed for a maximum
of two minutes; after that time a flashing message will
appear on the display saying:
DELIVERY COUNT
• Thedisplaywillread:
• BypressingtheENTER key the display will read:
• Allthedeliverykeyswillstarttoflashonandoff.
By pressing one of the delivery keys the amount of
the deliveries made will be visualised.
• Tosetthecounterbacktozero,presstheRESET
key.
 NOTE
The continuous coffee equals one delivery.
• Press ENTER to access waiter counts (if pro-
vided).
• Pressthe key and the display will read:
All the units’ small coffee keys
will begin to
flash on and off.
Example:
By selecting one of the first unit’s keys (the select-
ed key will remain lit up) the display will read:
which means the total amount of deliveries for that
unit.
• TosetthecounterbacktozeropressRESET.
• ToaccessthewaitercounterpressENTER.
• Whenthedisplayreads:
press  and the display will read:
PROGRAM DOSES
SELECT
DELIVERY COUNT
SELECTION TOTAL
GROUP TOTAL
GROUP TOTAL
GR. 1 DELI.
GROUP TOTAL
MACHINE TOTAL
ERROR