143
9.1.3 SWITCHING FROM TANK
TO DIRECT CONNECTION
To switch from tank to direct connection,
proceed as it follows:
Turn OFF the machine using the main
switch.
Press and hold the 1A and 1C buttons while
turning the machine ON using the main
switch. The T icon will blink 3 times and
then go out (signalling that the change
has been completed successfully).
9.1.4 SWITCHING FROM DIRECT
CONNECTION TO TANK
To switch from direct connection to tank,
proceed as it follows:
Turn OFF the machine using the main
switch.
Press and hold the 1A and 1C buttons
while turning the machine ON using the
main switch. The T icon will blink 3 times
and then remain steady for a few sec-
onds (indicating that the change has
been completed successfully).
06
05
07
04