60
PRE-OPERATION CHECK
Check Brakes
Hoses and Con n ectio n s
Inspect all brake hoses and connections for dampness or stains
from leaking or dried fluid. Tighten any leaking connections and
replace components as necessary. Refer to the Victory Service
Manual for torque values of fasteners or contact your Victory
dealer.
Brake Pads
Inspect front (1) and rear (2) brake pad thickness. Replace
brake pads when wear lines (3) are no longer visible, or when
pad thickness reaches 1.5 mm. See page 124.
2
1
3
To Next Page
Loading...
