How to fix no sound from Victrola VTA-67 speakers?
If there's no sound coming from the speakers of your Victrola Turntable, first, check the volume level and adjust it if it's too low. Secondly, verify that the input selector matches the playback source you're using; if not, select the correct input source.
Why won't my Victrola Turntable connect to Bluetooth?
If you are unable to pair your device with your Victrola Turntable via Bluetooth, first confirm that your device is Bluetooth compatible. If it is, try re-pairing the unit and device again.
Why Victrola VTA-67 cannot find radio stations?
If you cannot listen to any station or the signal appears weak on your Victrola Turntable, ensure that the desired station is properly tuned-in. Additionally, a nearby TV set might be interfering with the radio reception; try turning off the TV.
General| Speeds | 33 1/3, 45, 78 RPM |
|---|---|
| Drive System | Belt Drive |
| Built-in Speakers | Yes |
| Bluetooth | Yes |
| Encoding | No |
| Outputs | RCA |
| Connectivity | RCA, Bluetooth |
| Power Supply | AC |
| Type | Belt-Drive Turntable |
Covers essential safety guidelines for operating and maintaining the turntable to prevent hazards.
Details the function of buttons, screen, and jacks on the front panel of the turntable unit.
Explains the purpose of the FM antenna, LINE OUT jacks, and DC input on the rear of the unit.
Identifies and describes the various parts of the turntable mechanism, including the tone arm and stylus.
Guides users through initial setup, including removing protective covers and connecting the power adapter.
Explains how to turn the unit on/off, select modes, and adjust the volume level.
Details how to connect external speakers via RCA or use headphones for private listening.
Provides instructions on handling the unit after temperature changes to prevent condensation damage.
Provides essential advice on how to handle, clean, and store vinyl records to preserve their quality.
Instructions on how to safely remove the turntable stylus from the cartridge.
Step-by-step guide for installing a new stylus, including important cautions.
Addresses common issues like no power, no sound, noise, distortion, and unit unresponsiveness.
Solutions for problems related to poor FM reception or distorted radio sound.
Guidance for issues affecting turntable audio performance, such as stylus wear.
Resolves common Bluetooth connection problems, including no sound and pairing failures.
Lists key general specifications of the turntable, including power, dimensions, and weight.
Details the frequency range for the built-in FM radio tuner.
Outlines the supported playback speeds for vinyl records (33-1/3, 45, 78 RPM).
Provides technical details for the Bluetooth feature, including version, profiles, and operating distance.
Information regarding the unit's compliance with FCC rules for digital devices.
Specifies FCC limits for RF exposure and recommended installation distances.
A warning about potential exposure to chemicals, including lead, as required by California law.
Details compliance with Industry Canada's license-exempt RSS standards for radio devices.
Explains the product's warranty coverage, exclusions, and the process for obtaining service or returns.
To Next Page