Why is there no sound from the speakers of my Victrola VTA-72?
If your Victrola Turntable is not producing any sound from the speakers, check the following: 1. Ensure that the volume level is not set too low. Adjust it as needed. 2. Verify that the input selector matches the playback source you are using. Select the correct input source.
Identifies and explains the controls located on the front panel of the turntable unit.
Details the input and output ports found on the rear of the turntable unit.
Identifies key components of the turntable assembly itself.
Steps for preparing the unit for first-time use, including power connection.
Instructions for powering on, mode selection, and volume adjustment.
How to listen via RCA LINE OUT or headphones.
Pairing and playing audio from a Bluetooth-enabled device to the turntable.
Connecting the turntable to external Bluetooth speakers wirelessly.
Guidelines for handling, cleaning, and storing vinyl records to preserve quality.
Step-by-step instructions for safely replacing the turntable stylus.
Details on the device's compliance with FCC rules and regulations for digital devices.
Health warning regarding potential chemical exposure from the product.
Compliance information specific to Canadian regulatory standards.
To Next Page
General