Vicway VR660M - Installation Direction Setting; Lock Door Setting(Opt Lonal Function); Half-Open Setting(Oplional Function)

13.6 Installation direction setting
Press and hold on "SET" button for 3 seconds until the LED flashes
"1
". Press "UP" or "DOWN' to increase or decrease, adjust the LED to
flash "5", then press "SET" bullon.
It displays "R" or " L
", hold down the "UP" or "Down" bullon, you can
switch directlY.Choose the function which you need, press the "SET"
bullon,the LED displays the current selling.
NOTE:
uL " means left installation , uR" means right installation .
13.7
Lock door setting(Optional function)
(Only when the lock door function is available. the setting can be
proceed. The "lock' key can not be matched)
Press and hold on "SET" button
for 3 seconds until the LED flashes "1 ".
Press "
UP " or "DOWN" button to increase or decrease. Adjust the LED
to flash "SO, press ' SET" button to enter into lock door setting. The LED
displays the current selling.
Press "UP" button, the
LED displays "1 ", the lock door function is on. Press "DOWN" bullon, the LED
display
s" D ", the lock door function is off. Press "SET" button to confirm, the opener returns to standby
mode.
When the lock door function
is on and the door is fully closed, the opener wi ll lock the door
automatically. And then the door can only be opened by transmitter after unlocked by the "lock"
key(S2)
on the transmiller. (If not unlocked by the S2 button on the transmitter, the light will flash
tw ice when press the open key on the transmitter)
The default selling
is: invalid.
13.8 Half-open
setting(Optional function)
(Only wh en th e half-open fun ct ion is ava i labl e, the se ning ca n be pro cee d. Th e
ha~-op e n key on th e tran s mitt er can not be mat ched)
Press and hold on "SET" bullon for 3 seconds until the LED flashes "1
".
Press " UP " or "DOWN' button to increase or decrease. Adjust the LED to
flash "7". Press "SET' button to enter into half-open setting. The LED
displays the current selling.
Press "UP" or "DOWN" button
to increase or decrease. When the LED displays "1 ", the half-open
height
is 3D cm. When the LED displays "2 ", the half-open height is SDcm . When the LED displays "3 ",
the half-open he ight is 9Dcm. When the LED displays "D ", the half-open function is off. Press "SET"
bullon
to confirm, the opener retums to standby mode.
If the half-open function
is on, only when the door is fully closed, the door can half-open by the "S1 "
key on the transmitter. If the door is
at other pos~ion , the " S1 " key will not work.
The default selling
is : invalid.
13.99 . Alarm and maintenance function
When the LED flash, displaying "A", which means opener working circles exceeds the maximum
safety and need for
ma intenance, suggest you contact the maintainers .
- 13 -