66250782 - V2.5 - 30/06/18
- 7 -
6200 - 6300 - 6400 - 6700 Series
6200 - 6300 - 6400 - 6700 Series - Memory board User manual
6400 and 6700 Series Memory Board User Manual
HOW TO BROWSE STORED PICTURES OR VIDEOCLIPS
During normal operation or with the device in stand-by, press the but-
ton
(Memory) to enter into browsing mode (Fig. 7).
Once you are in browsing mode, use the buttons (Previous) and
(Next) to browse forward or backward through the stored pictures or vide-
oclips. In the top left of the screen the index number of the picture will be
shown (or videoclip) with the time and date of recording.
The index shows both the number of the current picture or videoclip and
the total number of pictures or videoclips stored.
To play a video, when selected, press (Play) button.
The device shows the length of the videoclip in the right top of the screen.
To stop it press the button (Stop Quit).
To go back and exit the browsing mode press the button (Stop Quit).
HOW TO DELETE ONE OR MORE RECORDED PICTURES OR VIDEOCLIPS
2016-07-280001-0100 09:46:10
DELETE?
Delete
Next
Delete
All
No
Fig. 8
2016-07-280001-0100 09:46:10
ARE YOU SURE?
NoYes
Fig. 9
2016-07-280001-0100 09:46:10
Deleting... 040%
NoYes
Fig. 10
When in the browsing mode (Fig. 7) press the button (Delete) to enter the delete mode (Fig. 8).
• Press the button (No) to go back and cancel the deletion;
• Press the button (Delete) to delete the currently selected picture or videoclip;
• Press the button (Next) to browse the next picture or videoclip stored;
• Press the button (Delete All) to delete all pictures or videoclips stored: the message “ARE YOU SURE?” will appear in the middle
of the display (Fig. 9);
• Choose between “YES” or “NO” using the buttons and . If you choose “YES” a progress bar will appear in the middle of the
display and all the pictures or videoclips stored will be deleted (Fig. 10);
NOTE: THE DELETE OPERATION IS IRREVERSIBLE!
BUILTIN MEMORY MANAGEMENT
When the memory is full, the next picture will delete the oldest (First-In-First-Out).
Picture memory capacity: 100 pictures.
HOW TO ADJUST THE DISPLAY
09:46:102016-07-28 ver1.05
MENU
DISPLAY
MEMORY
TIME
EXIT
Up
Down
EnterQuit
Fig. 11
09:46:102016-07-28 ver1.05
MENU
DISPLAY
MEMORY
TIME
EXIT
BRIGHTNESS
CONTRAST
COLOR
Up
Down
Enter
Quit
Fig. 12
09:46:102016-07-28 ver1.05
MENU
DISPLAY
MEMORY
TIME
EXIT
BRIGHTNESS
CONTRAST
COLOR
Up
Down
EnterQuit
Fig. 13
• From the status of Fig. 4, press the button (Menu) to open the menu (Fig. 11);
• Select the “DISPLAY” option using the buttons (Up) and (Down) then press the button (Enter) open a new menu (Fig. 12);
• Select the parameter to set using the buttons (Up) and (Down) then press the button (Enter) to edit the parameter
selected, alter the value using the buttons (Up) and (Down) then press the button (Enter) again (Fig. 13);
• To alter other parameter repeat the steps above otherwise exit from the display menu by pressing the button (Quit);
• To exit from the menu, press the button (Quit).
2016-07-280001-0100 09:46:10
Previous
Next
Stop
Quit
Delete
Fig. 7
To Next Page
Loading...
