EasyManua.ls Logo

Viessmann B2HAH13 - User Manual

Viessmann B2HAH13
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Please file in Service Binder
5461 885 - 04 01/2019
Operating Instructions
VITODENS
r
200-W/222-F
With Vitotronic 200 HO1B Controls
Read and save these instructions
for future reference.
Product may not be exactly as shown
IMPORTANT
H
Do not store or use gasoline or other
ammable liquids in the vicinity of this
or any other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliances.
Do not touch any electrical switches,
do not use any phone in your building.
Immediately call your gas supplier
from a neighbor’s phone. Follow
the gas supplier’s instructions.
If you cannot reach your gas supplier,
call the re department.
Installation and service must be
performed by a quali ed installer,
service agency or the gas supplier.
If the information in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
WARNING
Improper installation, adjustment, and/
or operation could cause carbon monoxide
poisoning resulting in injury or loss of life.
This product must be installed and serviced
by a professional service technician who is
experienced and qualified in hot water boiler
installation and gas combustion.
WARNING
Vitodens 200-W, B2HA and B2HB
Models 19 to 150, 68 to 530
Wall-mounted, gas-fired condensing boiler
For operation with natural gas and liquid propane gas
Heating input: 12 to 530 MBH
3.5 to 155 kW
Vitodens 222-F B2TA and B2TB
Models 19, 35, 68, 125
Floor-mounted, gas-fired condensing storage combi boiler
For operation with natural gas and liquid propane gas
Heating input: 12 to 125 MBH
3.5 to 37 kW

Table of Contents

Questions and Answers

  • B
    Brenda JohnstonSep 23, 2025
    What does error code E4 mean on my Viessmann B2HAH13?
    • F
      Frank RogersSep 23, 2025
      If your Viessmann Boiler displays error code E4, it indicates a fault in the supply voltage of 24 V. To resolve this, replace the control unit.
  • J
    Joe FranklinAug 27, 2025
    What to do if Viessmann Boiler displays fault code 38?
    • S
      stephaniestrongAug 27, 2025
      If your Viessmann Boiler displays fault code 38, it indicates a lead break in the boiler water temperature sensor. Check the boiler water temperature sensor.
  • M
    moranjacobAug 27, 2025
    Why is my Viessmann B2HAH13 Boiler showing fault code 30?
    • S
      sotoamandaAug 27, 2025
      If your Viessmann Boiler displays fault code 30, this indicates a short circuit in the boiler water temperature sensor. Check the boiler water temperature sensor.
  • C
    Christopher RichSep 1, 2025
    What does fault code d6 mean on a Viessmann B2HAH13 Boiler?
    • D
      Debbie AdkinsSep 1, 2025
      If your Viessmann Boiler displays fault code d6, it means Input DE1 reports a fault at extension EA1. Remove fault at the appliance concerned.
  • B
    bryantrobertSep 2, 2025
    What does fault code dE mean on Viessmann B2HAH13?
    • T
      Tom HillSep 2, 2025
      If your Viessmann Boiler displays fault code dE, it indicates a lead break in the room temperature sensor, heating circuit 2 (with mixer). Check room temperature sensor for heating circuit 2 and remote control settings.
  • A
    amber54Sep 4, 2025
    What does Fault Code b1 mean on my Viessmann B2HAH13 Boiler?
    • B
      Brandi WestSep 4, 2025
      If your Viessmann Boiler displays Fault Code b1, this indicates a communication error with the programming unit. You should check the connections and replace the programming unit if necessary.
  • M
    Marie LynnSep 13, 2025
    What does Fault Code C4 mean on my Viessmann Boiler?
    • S
      Stephen WilliamsSep 14, 2025
      If your Viessmann Boiler displays Fault Code C4, there is a communication error with the Open Therm extension. Check the Open Therm extension.
  • T
    Thomas SimonSep 12, 2025
    What does Fault Code bE mean on my Viessmann B2HAH13?
    • J
      Joshua Schneider MDSep 12, 2025
      If your Viessmann Boiler displays Fault Code bE, there is a communication error with the remote control Vitotrol for heating circuit 3 (with mixer). Check connections, lead, coding address "A0", and remote control settings.
  • L
    lynn26Sep 23, 2025
    Why is my Viessmann B2HAH13 Boiler showing error code C6?
    • M
      Matthew SmithSep 23, 2025
      If your Viessmann Boiler is showing error code C6, it indicates a communication error with the external variable speed heating circuit pump for heating circuit 2 (with mixer). To resolve this, check the setting of coding address "E5".
  • D
    David BurnettAug 25, 2025
    Why does my Viessmann B2HAH13 Boiler display fault code b1?
    • T
      Tyler PerryAug 25, 2025
      If your Viessmann Boiler is showing fault code b1, there may be a communication error with the programming unit. To resolve this, check the connections and replace the programming unit if necessary.

Viessmann B2HAH13 Specifications

General IconGeneral
ModelB2HAH13
CategoryBoiler
Fuel TypeNatural Gas / Propane
Efficiency95%
AFUE95%
Warranty10 years
Gas Connection Size3/4 inch
Water Connection Size1 inch

Related product manuals