To Next Page

To Previous Page

General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or

regarding a certain purpose always require a special written agreement.

Parameter Description Unit Range

Altered

values

P86 Room sensor calibration K -20...+20

P87 Evaporator sensor calibration K -20...+20

P88 Condenser sensor calibration K -20...+20

P90 Room sensor -50° adjustment

P91 Room sensor slew-rate

P92 Evaporator sensor -50° adjustment

P93 Evaporator sensor slew-rate

P94 Condenser sensor -50° adjustment

P95 Condenser sensor slew-rate

P96 Switch-on delay after door contact switch closed min. [0...20]

P97 Mains power frequency Hz 50, 60

P98

Door contact evaluation signal from bus

0 = As soon as the unit’s door contact at the bus system opens, the unit

is switched off.

1 = Only its own door contact signal is evaluated

(description, see Bus control manual)

0, 1

P101 Nominal temperature + 50

P102 Status byte 1

P103 Status byte 2

P104 Status byte 3

P105 Marker byte 7

P106 Selected unit number (only with remote control)

P107 Number of units at the bus

Page No. 26-GB 8.5.1 We reserve the right to make technical changes!

Viessmann CS User Manual

Questions and Answers: