Page No. 5-GB 3 - 3.1 We reserve the right to make technical changes!
3. Cleaning and maintenance of the Refrigeration unit
Attention!
The mains plug must be removed from the socket and
protected against re-insertion for all cleaning and
maintenance work.
Following commissioning, the Refrigeration unit should
bechecked periodically and cleaned as necessary. The time
span between the checks or cleaning should be establis-
hed based on the level of contamination.
The time interval for cleaning is dependent on on the
ambient conditions. Yet, at least one maintenance inspec-
tion should be performed annually.
The evaporator unit should be cleaned, either with a soft
cleaning brush, with compressed air or, in case of with
heavy grease deposits, with an industrial cleaner. Do not
use any sharp or sharp edged object for cleaning. It must
also be ensured that the thin lamella fins are not bent or
damaged during the cleaning process.
Do not spray the unit with water or steam!
3.1 Disposal of cooling agent
If the Refrigeration unit must be replaced with a new unit,
ensure that the Refrigeration unit pipelines are not dama-
ged to the point that the cooling agent leaks out.
Defective Refrigeration units or extracted cooling agent
must be disposed of in a manner compatible to the envi-
ronment and in accordance with applicable regulations.
To Next Page
Loading...
Need help?
General
