GB
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page 11 GB 7 - 7.1 Right reserved to make technical changes!
7. Operating the SD regulator
7.1 Normal operation
The current coldroom temperature is shown on the
display. If one of the buttons is activated [ ] or [ ] the
current temperature setting is shown. The right decimal
point on the display lights up. If there is not further
activation of the button within ten seconds, the room
temperature is shown again.
By pressing the „Stop-Start-Enter“ button, the unit can be
switched off or on again. In the switched-off state, the
display shows „OFF“.
If, in the switched-off state, the two buttons [ ] and [ ]
are pressed and held, and the button „Stop-Start-Enter“ is
subsequently activated, the unit will begin a defrosting
cycle. If the two buttons [
] and [ ] are not activated on
starting the unit, the unit will begin refrigeration. If a
defrosting cycle has been started prior to this, it will be
interrupted.
Do not activate the buttons with pointed objects
such as pens or screwdrivers.
Display during operation
Function German English French
StandBy OFF
Defrost Abt. dEF. dEg.
Display with
Button Activation and
Active Key-Lock
Bo.L
Fault (x= fault number) F.x E.x d.x
Version Display „Sd“ -> „5.13“
To Next Page
Loading...